Spectracom - Essential Ingenuity

GSG-5/6 Series

Example C code for GSG-5/6

Example C code to interface with the GSG-5/6 Series GNSS Simulators

StudioView Can't Load Google Maps

Due to a change in the Google Maps API, older versions of StudioView can not load Google Maps

How Does a Leap Second Affect the GPS Signal

Leap seconds are added the UTC time scale to better align atomic time with solar time. The GPS time scale does not include the leap second "discontinuity" but the GPS interface specification defines how a GPS device is to accommodate the calculation to UTC during a leap second event.

Troubleshooting GPS test configurations for SAASM-based receivers

Documentation is available for testing SAASM receivers when using a GNSS simulator.

GSG-5/6 Series Internal Memory Information

We have a document that describes what information is held in non-volatile memory and how it can be sanitized to remove the information

GSG-5 and GSG-6 Series Version 5.5.7

Antenna Polarization - Circular vs Linear for testing GPS

Spectracom sells Right Hand Circular Polarized antennas for Over-the-Air testing

GSG-5/6 Series 3D CAD Drawing

The GSG-5/6 Series 3D CAD file, .stp format

GSG-5 and GSG-6 Series Version 5.5.1

Changes from 5.1.13. This release is available to ASP customers.

Z540 Calibrations

Spectracom cannot provide Z540 calibration service.

Cannot Save Execution Log Error

GSG might show error 'cannot save execution log' when running a scenario after a firmware update.

GSG-5 and GSG-6 Series Version 5.5.4

Changes from 5.5.1. Released to ASP customers. Contact Spectracom to receive the update.

Manually Downloading GSG Ephemeris Data

This document details how to manually download Ephemeris data from a GSG system.

ISO 17025 Calibration

Does Spectracom have ISO 17025 Certification?

GSG Simulators Recommended Calibration Interval

GNSS Simulators, GSG-5, GSG-6 Calibration Recommendation

GSG Options

How to tell what options are installed in a GSG-5/6 Series Unit

GSG-5/6 Series File Checksum

How to calculate the checksum for files transferred to GSG-5/6 Series GNSS Simulators

GPS Simulation

Simulation allows easy and simple testing of a GPS receiver.

GNSS Simulator Video Demonstration

Demonstration video of configuring and running a scenario.

GSG-5 and GSG-6 Series Version 5.1.13

Changes from Firmware Version 5.1.13

GSG-5 and GSG-6 Series Version 5.1.11

Changes from Firmware Version 5.1.9

GSG-5 and GSG-6 Series Version 5.1.9

Changes from Firmware Version 5.1.7

GSG-5 and GSG-6 Series Version 5.1.7

Changes from Firmware Version 5.1.5

GSG-5 and GSG-6 Series Version 5.1.5

Changes from Firmware Version 5.1.3

GSG-5 and GSG-6 Series Version 5.1.3

Changes from Firmware Version 5.1.1

GSG-5 and GSG-6 Series Version 5.1.1

Changes from Firmware Version 5.0.1

GSG-5 and GSG-6 Series Version 5.0.1

Changes from Firmware Version 4.51

GSG-5 and GSG-6 Series Version 4.51

Changes from Firmware Version 4.5

GSG-5 and GSG-6 Series Version 4.5

Changes from Firmware Version 4.11

GSG-5 and GSG-6 Series Version 4.11

Changes from Firmware Version 4.09

GSG-5 and GSG-6 Series Version 4.09

Changes from Firmware Version 4.07

GSG-5 and GSG-6 Series Version 4.07

Changes from Firmware Version 4.05

GSG-5 and GSG-6 Series Version 4.05

Changes from Firmware Version 4.01

GSG-5 and GSG-6 Series Version 4.01

Changes from Firmware Version 3.03

GSG-5 and GSG-6 Series Version 3.03

Changes from Firmware Version 3.00

GSG-5 and GSG-6 Series Version 3.00

Version 3.00 Release Notes

How to Set Up a GSG-5 Series System via Ethernet

This document provides directions on how to set up a GSG-5 Series system using an Ethernet connection.

Downloading Ephemeris Data Using StudioView

This document details how to download Ephemeris data from a GSG system using the StudioView software.

GSG-5 Series System Setup

This document provides step-by-step instructions on how to set up and configure a GSG-5 Series Signal Generator.

Products

Products