Front panel and Web User Interface show the IP address as "0.0.0.0"

The IP address will be displayed on the front panel as 0.0.0.0 (as shown below) and also in the Web User Interface (UI), if the Ethernet port is not connected to a network hub, switch or a stand-alone PC.
December 6, 2013
Affected Products: 
SecureSync

In Software Versions 5.0.0 through 5.1.0, the IP address will be displayed as "0.0.0.0" on the front panel and in the Web UI, if the corresponding Ethernet port (Eth0, and/or Eth1/Eth2/Eth3 – if installed) is not connected to a network hub, switch or a stand-alone PC. This indicates this Ethernet interface is currently "down" because its not detecting a connection to another network device (hub/switch or computer).

Note: software version 5.1.2 improves this indication by now also displaying the word "Unplugged" on the front panel and showing "Cable Unplugged" in the web browser.